We – EPG Group the greatest couplings and gears manufacturing facility in China with five distinct branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /
Oligomer Response Employed Discharge Melt Gear Pump
Technical specs
one,polymer soften equipment pump
2, fit for big ability output
three, fit for very higher or minimal viscosity polymer
Huge movement fee polymer soften gear pump for reactor as discharge pump
GM-LK series of polymer melt gear pump is designed with a large entrance , suitable for the high temperature and high viscosity polymer melt conveying reaction, such as resin, chemical fiber industry, generally installed on the lower part of the reaction kettle, used as discharge pump.This series of melt gear pump has good self-priming performance, can be used in the vacuum reaction condition, the polymer material conveying and pressurization.
This GM-LK collection large circulation rate polymer soften gear pump utilised underneath the response kettle/reactor as a discharge pump, you can see the subsequent photographs
Main application fields:
For Processing:
PET PBT
PA6 PA66 PA12
LDPE LLDPE HDPE HMWPE
PP EVA PB
PS HIPS ABS SAN
PC PEK
PMMA POM TPU
Other high viscosity Polymers
Pictures of the discharge pump for response kettles /reactor
The characteristic of this GM-LK sequence polymer melt equipment pump below the response kettle as discharge pump.
1)it can be used on high temperature (350ºC),high pressure(15MPa),high viscosity (40,000Pas)working condition.
two)The pressure flow pulsation is very small, and even can achieve linear output flow,easy to control
three)Good self-priming performance, can be used in the entrance with the operation condition of vacuum (.05 ~ 0.09 MPa)
four)Precise structure, high precision, long service life
Technical data:
Viscosity: 500~40000Pas(five hundred,000~40,000,000cP)
Suction side pressure : Vacuum(-.05~-.09MPa)~10MPa
Discharge side pressure: 0~15MPa
Differential pressure: 15MPa
Temperature: ≤350ºC
Heating method: Fully heating medium Jacketed
HT medium pressure: ≤1.6MPa
Pump variety and parameter
| Type |
Quantity (cc/r) |
Max roate pace (r/min) |
Outlet force (MPa) |
Inlet strain (MPa) |
Charge of flow m3/h | Temperature | ||
| Reduced viscosity content 1-1000Pa·s |
High viscosity materials a thousand~8000Pa·s |
Ultra-higher viscosity materials >=8000Pa·s |
||||||
| GM-LK-a hundred | 100 | a hundred | ≤35 | Vacuum~five. | ≤0.51 | ≤0.36 | ≤0.21 | ≤350ºC |
| GM-LK-160 | a hundred and sixty | one hundred | ≤0.eighty two | ≤0.57 | ≤0.34 | |||
| GM-LK-200 | 200 | 100 | ≤1. | ≤0.7 | ≤0.four | |||
| GM-LK-250 | 250 | a hundred | ≤1.3 | ≤0.nine | ≤0.five | |||
| GM-LK-355 | 315 | 100 | ≤1.6 | ≤1.one | ≤0.seven | |||
| GM-LK-five hundred | 500 | one hundred | ≤2.6 | ≤1.eight | ≤1.1 | |||
| GM-LK-750 | 750 | 80 | ≤3.one | ≤2.one | ≤1.three | |||
| GM-LK-1250 | a thousand | 80 | ≤4.1 | ≤2.nine | ≤1.seven | |||
| GM-LK-2000 | 2500 | 80 | ≤10 | ≤7 | ≤4 | |||
| GM-LK-3150 | 3150 | eighty | ≤13 | ≤9 | ≤5 | |||
| GM-LK-4500 | 4500 | sixty | ≤14 | ≤10 | ≤6 | |||
| GM-LK-6300 | 6300 | sixty | ≤19 | ≤13 | ≤8 | |||
| GM-LK-8000 | 8000 | sixty | ≤24 | ≤17 | ≤10 | |||
| GM-LK-12000 | 12000 | 50 | ≤31 | ≤21 | ≤13 | |||
| GM-LK-25000 | 25000 | fifty | ≤64 | ≤45 | ≤27 | |||
| Remark:the soften gear pump circulation is associated with the work speed, content viscosity, pressure, So the product assortment remember to ask for us. |
||||||||
Sealing structure
1)the melt dynamic seal and packing seal
two)Single/double side machanical seal
3)With cooling melt dynamic seal
4)High temperature resistant packing seal
Installation way: GM-LK series melt gear pump generaaly is installed under the reaction kettle, it is used as the material discharge pump, usually arranged horizontally.
Drive mode:motor + reducer + universal coupling
Commissioning
We provide the operation manual for customers to gudie to install the screen changer, and at the requirement of user, salers should send technician to install and commissioning the die at site of Buyers, expenses of the trip should be borne by Buyers.
Soon after-sales service
12 months with proper operation by user, all the spare parts shall be replaced free of charge under guarantee period, fee for transportation and packing will be borne by users.
/ The use of unique tools manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our business and the shown EPT components contained herein are not sponsored, authorized, or made by the OEM. /
